Explosionsgeschütztes Licht im Infield

Infield explosion-proof light Applicable places
Suitable for petroleum and petrochemical, mining, metallurgy, ships, offshore oil platforms, oil stations, oil depots,
Gas stations, drilling, well sites, offshore oil platforms, various installation areas, pipeline areas, workshops, transfer stations,
Fixed lighting in flammable and explosive places such as joint stations, oil pump rooms and roads.
Infield explosion-proof light Performance characteristics
●Create a safe work environment
The excellent explosion-proof structure design ensures that the product can be used safely in various flammable and explosive places.
The protection level of the shell reaches IP66, with good waterproof performance and can resist the impact of turbulent waves.
Integral structure design, light, good impact resistance, can work reliably and stably in vibration environment.
●Easy realization of energy saving targets
Accurate light distribution design, with mirror high-purity aluminum reflector, to achieve a wide range of flood lighting, lamps and lanterns
The efficiency is as high as 77%, which is more than 30% higher than the industry level.
The optimized electrical supporting system design makes the electrical efficiency of the lamps reach 90%, and the power factor reaches 0.9.
Using high-efficiency gas discharge light source, high light efficiency, long life, not only effectively improve work efficiency, but also reduce
Reduced product maintenance.
●Reduce maintenance workload
Integral structure, can adjust the lighting angle in a wide range, with special bulb maintenance cover, installation
Easy to maintain.
Advanced shell anti-corrosion coating, anti-corrosion grade up to WF2, to ensure lamps in harsh environments such as salt spray
Does not corrode.
According to the national military standard quality control system, after strict reliability and personalization tests, the failure rate of lamps and lanterns
lower.
Infield explosion-proof light Energy saving one - high luminous flux utilization rate
The reflector adopts A-grade high-purity mirror aluminum, which can improve the light efficiency by 25%~45%, greatly reduce the number of on-site lamps and reduce power consumption;
The mirror material is polished and sandblasted. The reflectivity is as high as 95%, the light is uniform and soft, high temperature resistance, not easy to age, wrinkle.
Infield explosion-proof light Light distribution--efficient light distribution
Using computer simulation design, the secondary reflection of light is greatly reduced, the light distribution is uniform, the light loss is reduced, the visual fatigue of the staff is effectively avoided, and it can meet the needs of different working areas.
lighting needs.
Infield explosion-proof light Stable--Temperature
The long-term stability of lamps and lanterns is the guarantee for the stability of the electrical system. As one of the important factors affecting the stable operation of the electrical system, whether the temperature is effectively controlled, and ultimately affects the
service life of lamps.
Various heat dissipation structures enable the heat generated by the lamps to be quickly dissipated. Reduce the working temperature of the electrical system to ensure that the lamps work stably for a long time.
Infield explosion-proof light Reliable - Protection
The luminaire housing is a one-piece design with high-quality seals. Make the protection level of the lamp housing reach a high standard. Reduce maintenance, can meet the long-term use in various harsh environments.
Infield explosion-proof light Unique design - air pressure balance
The unique metal activated carbon air pressure balance device design balances the air pressure inside and outside the lamp, prevents moisture, oil and gas, and corrosive gases from entering the lamp cavity in different environments, and keeps the interior clean.
Extend the service life of lamps.
Infield explosion-proof light Main technical parameters

Modell	BFC 8130/BFC8140
Explosionsgeschützte Markierung	Exde IIBT4/T6Gb
Nennspannung.	AC220V/50Hz
Lichtquelle	MH/HPS gas discharge lamps
Nennleistung	70W	400W
LED-Lichtstrom	6000Im	48000Im
Schutzklasse	Schutzart IP66
Korrosionsschutz	WF2
Einlassgewinde	G3/4"
Kabelspezifikationen	Mittel 7-Mittel 12mm
Installationsmethode.	Standfuß, Wandhalterung, Deckenmontage
Arbeitsumgebung	Temperatur: -40 ~ 45C
Lebensdauer	≥10000H
product weight	8kg

Infield explosion-proof light Order Notice

1. Bitte wählen Sie bei der Bestellung eine nach der anderen nach dem Produktmodell aus.
2. Die Lampe wurde mit Stromversorgung und Lichtquelle ausgestattet, wenn sie das Werk verlässt.
3. Die Lampen können mit verschiedenen Installationsmethoden ausgestattet werden.
4. Das Unternehmen unterstützt OEM / ODM-Dienstleistungen, bitte kontaktieren Sie den Account Manager für detaillierte Anforderungen